Full Rotary Letterpress DS-260-R6C+1
✦DEMO
✦SPECIFICATION
Model | DELTA 260-R6C+1 |
Gearing | 1/8''cp |
Max. Web Width | 260mm |
Max. Printing Width | 250mm |
Unwinding Roll Dia | 800mm |
Rewinding Roll Dia. (Max) | 800mm |
Printing Speed (Max) | 100m/min |
Printing Length (Max) | 460.375mm |
Printing Length (Min) | 190.5mm |
Server Motor | 7.5kW |
UV Dryer (Printing Station) | 6kW |
UV Dryer (Flexo Varnish Station) | 6kW |
✦STANDARD ACCESSORIES
Tensional Control Unwinder | 1 set |
Tensional Control Rewinder | 1 set |
Waste Strip-off Device | 1 set |
Web Placing Device | 1 set |
Web Guided System | 1 set |
Central Wheel(Diameter 1000mm rubber wheel) | 1 set |
Printing Station(with washing tools) | 6 sets |
Backside Edge Trimming Device(Slitter) | 1 set |
Main Counter | 1 set |
Meter Counter and Sheet Counter | 1 set |
UV Dryer | 6 sets |
Printing Station Horizontal and Vertical Adjustment with Pressure Gauge | 7 sets |
Flexo Varnish Surface Coating Device(with UV Dryer) | 1 set |
Printing Cylinder | 5 sets |
Corona Treater | 1 set |
Rotary Die Cutting Station | 1 set |
OPP Laminating Device | 1 set |
Electrostatic Eliminator | 1 set |
PLC Control System | 1 set |
Standard Tool | 1 set |
✦OPTIONAL ACCESSORIES
Reverse-side and Backside Printing Device
Web Monitoring and Inspection System
Cooling System
Cold Foiling System with UV Dryer
Cut the Single Sheet System
✦FEATURES
Rotary Die-Cutting Control with linear direction and pressure adjustments. This unit can be accompanied with the die-cutting, computer sprocket hole punching, perforation lines and in-mold-label die cutting. | Cold Foiling Device To fulfill more complicated printing requirement, |
PLC UV-Control With PLC UV-Control, the breakdown of control housing, including the strength and usage hours of the UV lights can be detected. | Japan Mitsubishi Tension Controller Installation of Japan Mitsubishi Tension Controller onto the unwinder and rewinder sections to provide accurate paper pulling tension to prevent |
EL Web Guided System Installation of German EL Web Guided System to prevent | Multi-Layer Adhesive Device With slitter, position adjusts and rotary die cutting station, complete the multi-layer adhesive requirement online. |
✦Suitable Materials
1.Adhesive paper, Laminate materials, BOPP film
2.
✦Suitable Die-cutter
1
2.Rotary hard dies
✦Standard Plate Making Reference
- 1. Photopolymer
2. Hardness 45°~55°
3. Thickness 0.95mm
4. Depth 0.69mm (Reference)
✦Machine video